Samsung refrigerators are some of the most popular on the market. But what do you do when it stops working properly?
In this article, we will provide a step-by-step guide on how to reset a Samsung refrigerator, as well as how to resolve common error codes. So whether your touch screen isn’t responding or the temperature is off, we have you covered!
Read more: Connect Google Home to your Samsung TV.
What does resetting do to your refrigerators?
When you reset your refrigerator, you are essentially clearing all its data and restoring it to factory settings. This can be helpful in cases where the fridge isn’t working properly or if you want to wipe out any old data before selling or giving it away.
It’s a fairly simple process, but make sure to read through the instructions carefully so that you don’t end up doing more harm than good!
Where is the Reset Button on a Samsung refrigerator?
Depending on the model of your Samsung refrigerator, the reset button will be found in various locations. Typically, it is located somewhere on the fridge’s front panel, either near the bottom or on the side; there will be a button or a switch labeled “reset.”
Note: If you’re having trouble finding it, consult your refrigerator’s user manual for more specific instructions.
What are the Signs That Show That You Need to Reset Your Samsung Refrigerator?
There are a few different signs that may indicate that you need to reset your Samsung refrigerator. These include:
- The touch screen isn’t responding
- The temperature is off or not cooling properly
- The temperature indicator is flashing randomly or isn’t working at all.
- The ice maker isn’t working
- Water isn’t coming out of the dispenser
If you’re experiencing any of these issues, try resetting your fridge before calling for service. It’s possible that this will fix the problem, and it won’t cost you anything!
Note: The Samsung refrigerator has a self-diagnosis troubleshoot feature built-in, which can recognize the majority of issues and display them as error codes. Match the error code to the problem and correct it according to the solution mentioned.
Before you begin resetting the refrigerator, make sure that all of your food is safely stored and will not be harmed in any way. Unplugging or turning off the refrigerator for an extended time can cause a temperature increase inside, causing perishable items to go bad! If required, transfer them to another cooler or freezer until it’s safe to reintroduce them.
How do I do a hard reset on my refrigerator?
To reset the refrigerator, first, unplug the power source, press the reset button to reset the device, and then reconnect the power.
Step 1: Disconnect the power
You will need to disconnect power from both ends: at the outlet as well as on top of the unit itself if there are wires running directly between these two points.
This ensures full electrical safety during servicing operations like removing covers and replacing parts; otherwise, people can get shocked by accidentally touching live metal surfaces with their hands while working inside the fridge.
Step 2: Press the Reset button
Once you have disconnected power, locate the reset button on your Samsung refrigerator and press it with a pen or paper clip for about five seconds until the indicator light turns off.
Step 3: Reconnect the Power
Reconnect power to both ends and turn on the fridge–you’re all set!
How To Reset A Samsung Refrigerator From Shop Mode?
If your Samsung refrigerator is stuck in Shop Mode, you’ll need to reset it by following these steps:
- Press down the “Power Freezer” button and “Power Cool” button simultaneously holding it for 5 seconds.
- Release the buttons.
- The refrigerator is reset and you’re all set!
How To Reset Samsung Refrigerator From Demo Mode?
If your refrigerator is stuck in Demo mode, you can reset it by following these steps:
Samsung refrigerators from 2014 and older.
Step 1: First press the “Power Freeze” and “Filter Reset” buttons simultaneously.
Step 2: Hold them for about 7 seconds.
Samsung Refrigerators newer models
Step 1: Press the “Power Cool”, “Power Freeze” and “Filter Reset/Freezer” buttons simultaneously.
Step 2: Hold them for about 7-10 seconds.
How To Reset Your Samsung Refrigerator: Control Panel?
If the control panel on your Samsung refrigerator isn’t working, you’ll need to reset it by following these steps:
Step 1: Press the “Power cool” & “Power Freeze” buttons at the same time.
Step 2: Hold them for about 7-10 seconds.
Step 3: Check for the numbers on the display reset. You are all set!
How To Reset Your Samsung Refrigerator: Wire Harness?
If your refrigerator has a wire harness, you’ll need to reset it by following these steps:
Step 1: Disconnect the power supply from both ends.
Step 2: Locate and press down on the reset button for about five seconds until the indicator light turns off.
Step 3: Reconnecting power is all you have to do!
How To Reset Samsung Fridge Touch Screen?
If the touch screen on your Samsung fridge has stopped working, you can reset it by following these steps:
Step 1: Locate the red switch on top of the fridge, which is marked with Push.
Step 2: Flip the red switch and then flip it back to its original position again.
Step 3: Your touch screen should be functional at this point.
How To Reset Samsung Fridge Temperature?
To reset the temperature in a Samsung refrigerator, follow these steps:
Step 1: Press down on the “Power Freeze” buttons at once; holding them for approximately ten secs.
Step 2: Keep pressing the button until the right temperature is achieved.
Yay! Enjoy the temperature you desire to keep.
How To Reset/Change A Samsung Freezer Temperature?
If you want to change the freezer temperature on a Samsung refrigerator, follow these steps:
Step 1: Locate the control panel in the Samsung refrigerator.
Step 2: Press the freezer button until the desired temperature is reached.
After following these steps, your Samsung freezer should be set to your desired temperature! If not, go back to Step One and try again.
How Do I Reset my Samsung Refrigerator After a Power Outage?
If you have experienced a power outage, your Samsung refrigerator can be reset by following these steps:
Step 1: Press the “Power save” and *lighting buttons”.
Step 2: Keep pressing the button for 10 sec.
Note: The Samsung refrigerator has a troubleshooting feature that shows the problem code, explains how to fix it, and guides you toward resolving the issue.
How To Reset Samsung Ice Maker After Power Outage?
If you experience a power outage and your Samsung ice maker stops working, don’t worry. You can reset it yourself pretty easily. Here’s how:
- Open the freezer and locate the ice maker. Defrost the icemaker.
- There should be a small button on the front of it. Press that blue reset button and hold it for about five to ten seconds until you hear a beep.
- Release the lever and wait for about 30 seconds.
- Replace any frozen food that may have melted and restart your fridge by pressing the power button.
- Your Samsung ice maker should now be up and running again! If you experience any problems, don’t hesitate to give Samsung support a call.
How do I Reset my Samsung Refrigerator 22E Error Code?
The error code 22E Indicates that your Samsung Refrigerator is damaged or isn’t operating properly. The 22E Error code is most often induced by the following problems: water accumulation in the drainage, blocked vent hole, circuit board damage, system failure, motor difficulties, or wiring disconnection.
To reset the Samsung Refrigerators with 22E Error Code Press the Power button and Lighting buttons simultaneously for 10-15 seconds.
Samsung Fridge Error Code 22c: What It Is And How To Fix It!
33E is an error code that appears when the ice pipe heater has failed.
When this occurs, the ice maker stops working.
Simply press and hold the upper left and upper right buttons at the same time for 5 seconds to reset the error code.
Do Samsung Refrigerators Have Reset Buttons?
Unfortunately, not every Samsung refrigerator has a reset button. You can reset your Samsung refrigerator by simultaneously pressing Power Cool and Power Freeze for about 10 seconds.
How To Reset Samsung French Door Refrigerator After Power Outage
After a power outage, find the power freeze and power cool buttons on your Samsung French door refrigerator. Until you hear a beep, press and hold these buttons simultaneously. This will reset your refrigerator.